REMEHA P 420 Assembly Instructions Manual page 14

13
14
Boiler body accessories package
Assemble the door of the combustion chamber (4 nuts M12 + 4
thick washers)
Put in place the added hinge with its hinge pin.
14
Put in place the lower plug and the upper plug with the sensor
tube (boiler body accessories package).
Do not forget the hemp.
Put the 8 M12x50 pins in place in the holes provided for this
purpose.
Put the 2 M12x85 pins in place in the holes provided for this
purpose.
Fit the hinges to the sweeping doors (package CS20) using 2
screws HM 12 x 25 + 2 nuts M 12 + 4 washers DE 12
- Fit the hinge on the door of the combustion chamber (boiler
body accessories package) to the left or right depending on which
way you wish to open it and secure using 3 screws HM12x30 +
washers CL14.
P 420 02/04/08 - 300016854-001-A