Casing Assembly - REMEHA P 420 Assembly Instructions Manual

24 Casing assembly

Position the front side panels (length 520 - Package RB2) in the
lower casing supports and hook them into the cable ways.
Position the front side panels with the bushes pointing to
the front of the boiler.
Fix to the front on the lower casing brackets using 2 screws
HM5x25 + serrated washers.
25
Position the remaining side panels in the order shown in the
diagram: position each panel in the lower casing supports and
hook it into the cable way.
20
Fit to the front (2 screws Ø 3.94x12.7 + serrated washers).
Position the burner cable as shown in the diagram and on the
opposite side to the hinges on the door of the combustion chamber.
-
Position the rear side panels with the bushes pointing to
the rear of the boiler.
Boiler
Front
P 420-8 520(RB2)
P 420-9 520(RB2)
P 420-10 520(RB2)
P 420-11 520(RB2)
P 420-12 520(RB2)
P 420-13 520(RB2)
P 420-14 520(RB2)
P 420
Insulation width, boiler body
930(MP3)
480(MP4) 610(MP5)
480(MP4) 770(MP2)
480(MP4) 930(MP3)
480(MP4) 480(MP4)
480(MP4) 480(MP4)
480(MP4) 480(MP4)
02/04/08 - 300016854-001-A
Rear
610(MP5)
770(MP2)
930(MP3)