REMEHA P 420 Assembly Instructions Manual page 10

9 Fitting the upper and lower assembly rods and the upper casing
supports
(1) Front - (2) Rear
- Fit the upper assembly rods (boiler body accessories) in the order
shown in the diagram above. Place the expansion spring and its
washer on each rod at the rear. Stop tightening the nuts when
the free space between the threads is around 2 mm.
- Fit the upper casing supports (package CS13) and the upper
cross-bars (package CS10-11-12-14) with the assembly rods
(boiler body accessories package) as per the details A-B-C-D.
- Fit the lower assembly rods in the order shown in the diagram.
- Remove the assembly tool.
10
P 420 02/04/08 - 300016854-001-A