Communications - GE t60 Instruction Manual

5 SETTINGS
a) MAIN MENU
PATH: SETTINGS PRODUCT SETUP

COMMUNICATIONS

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
b) SERIAL PORTS
The T60 is equipped with up to three independent serial communication ports. The faceplate RS232 port is intended for
local use and is fixed at 19200 baud and no parity. The rear COM1 port type is selected when ordering: either an Ethernet
or RS485 port. The rear COM2 port be used for either RS485 or RRTD communications.
GE Multilin
COMMUNICATIONS
SERIAL PORTS
NETWORK
MODBUS PROTOCOL
DNP PROTOCOL
DNP / IEC104
POINT LISTS
IEC 61850 PROTOCOL
WEB SERVER
HTTP PROTOCOL
TFTP PROTOCOL
IEC 60870-5-104
PROTOCOL
SNTP PROTOCOL
EGD PROTOCOL
ETHERNET SWITCH
T60 Transformer Protection System
5.2 PRODUCT SETUP
5.2.4 COMMUNICATIONS
See below.
See page 5–17.
See page 5–17.
See page 5–18.
See page 5–21.
See page 5–22.
See page 5–33.
See page 5–33.
See page 5–33.
See page 5–34.
See page 5–34.
See page 5–34.
5
5-15