Commands And; Commands; Commands Menu; Virtual Inputs - GE t60 Instruction Manual

7 COMMANDS AND TARGETS
7 COMMANDS AND TARGETS 7.1COMMANDS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The Commands menu contains relay directives intended for operations personnel. All commands can be protected from
unauthorized access via the Command Password; see the Password Security section of Chapter 5. The following flash
message appears after successfully command entry:
PATH: COMMANDS COMMANDS VIRTUAL INPUTS

COMMANDS

VIRTUAL INPUTS

MESSAGE
The states of up to 32 virtual inputs are changed here. The first line of the display indicates the ID of the virtual input. The
second line indicates the current or selected status of the virtual input. This status will be a logical state 'Off' (0) or 'On' (1).
PATH: COMMANDS COMMANDS CLEAR RECORDS
COMMANDS

CLEAR RECORDS

GE Multilin
COMMANDS
COMMANDS
VIRTUAL INPUTS
COMMANDS
CLEAR RECORDS
COMMANDS

SET DATE AND TIME

COMMANDS

RELAY MAINTENANCE

COMMAND
EXECUTED
Virt Ip 1
Off
↓
↓
Virt Ip 32
Off
CLEAR USER FAULT
REPORTS? No
CLEAR EVENT RECORDS?
No
CLEAR OSCILLOGRAPHY?
No
CLEAR DATA LOGGER?
No
T60 Transformer Management Relay
7.1 COMMANDS

7.1.1 COMMANDS MENU

7.1.2 VIRTUAL INPUTS
Range: Off, On
Range: Off, On
7.1.3 CLEAR RECORDS
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
7
7-1