GE t60 Instruction Manual page 73

Ur series transformer management relay
Hide thumbs Also See for t60:
Table of Contents

Advertisement

4 HUMAN INTERFACES
d) CUSTOM LABELING OF LEDS
Custom labeling of an LED-only panel is facilitated through a Microsoft Word file available from the following URL:
http://www.GEindustrial.com/multilin/support/ur/
This file provides templates and instructions for creating appropriate labeling for the LED panel. The following procedures
are contained in the downloadable file. The panel templates provide relative LED locations and located example text (x)
edit boxes. The following procedure demonstrates how to install/uninstall the custom panel labeling.
1.
Remove the clear Lexan Front Cover (GE Multilin Part Number: 1501-0014).
2.
Pop out the LED Module and/or the Blank Module with a screwdriver as shown below. Be careful not to damage the
plastic.
3.
Place the left side of the customized module back to the front panel frame, then snap back the right side.
4.
Put the clear Lexan Front Cover back into place.
e) CUSTOMIZING THE DISPLAY MODULE
The following items are required to customize the UR display module:
Black and white or color printer (color preferred)
Microsoft Word 97 or later software
1 each of: 8.5" x 11" white paper, exacto knife, ruler, custom display module (GE Multilin Part Number: 1516-0069),
and a custom module cover (GE Multilin Part Number: 1502-0015)
1.
Open the LED panel customization template with Microsoft Word. Add text in places of the LED x text placeholders on
the template(s). Delete unused place holders as required.
2.
When complete, save the Word file to your local PC for future use.
3.
Print the template(s) to a local printer.
4.
From the printout, cut-out the Background Template from the three windows, using the cropmarks as a guide.
5.
Put the Background Template on top of the custom display module (GE Multilin Part Number: 1513-0069) and snap the
clear custom module cover (GE Multilin Part Number: 1502-0015) over it and the templates.
GE Multilin
( LED MODULE )
( BLANK MODULE )
T60 Transformer Management Relay
4.2 FACEPLATE INTERFACE
Push in
and gently lift
up the cover.
4
4-7

Advertisement

Table of Contents
loading

Table of Contents