Operation of a button's second function:
Press the [FUNC] button - the F indicator LED will illuminate, then press the
required function's button.
Press the [FUNC] button again to exit the secondary function. At this time, the
F indicator LED will go off.
Pressing the [FUNC] button for 1-2 seconds will take you into the System Menu
(see later in this manual for details of parameters that can be set).
■ In any function (including the secondary FUNC setting) a short press of the
main knob will save the setting. This will also exit the function setting mode and
return you to the main interface.
Status display area
Mode display
VFO display area
Multi-function indicator
Receiving state is meter s
Transmission state is power
meter
Waterfall diagram display area
Screen Display Icons
Power supply voltage indication
Volume indication
Receive bandwidth indication
Standing-wave display area
Receiving level display
Spectrogram display area
19