Omron NX1P Programming Manual page 9

Manual name Cat. No.
NJ/NX-series W508
Motion Control
Instructions
Reference Manual
NJ/NX-series W505
CPU Unit
Built-in

EtherCAT Port
User's Manual
NJ/NX-series W506
CPU Unit
Built-in
EtherNet/IP Port
User's Manual
NJ/NX-series W503
Troubleshooting
Manual
Sysmac Studio W504
Version 1
Operation Manual
NJ/NX-series W514
Startup Guide for
Motion Control
Model
NX701-□□□□ Learning about the
NJ501-□□□□ specifications of the
NJ301-□□□□ motion control
NJ101-□□□□ instructions.
NX1P2-□□□□
NX701-□□□□ Using the built-in
NJ501-□□□□ EtherCAT port on an
NJ301-□□□□ NJ/NX-series CPU
NJ101-□□□□ Unit.
NX1P2-□□□□
NX701-□□□□ Using the built-in
NJ501-□□□□ EtherNet/IP port on an
NJ301-□□□□ NJ/NX-series CPU
NJ101-□□□□ Unit.
NX1P2-□□□□
NX701-□□□□ Learning about the
NJ501-□□□□ errors that may be
detected in an
NJ301-□□□□
NJ101-□□□□ NJ/NX-series
NX1P2-□□□□ Controller.
SYSMAC-SE2 □□□
Learning about the
operating procedures
and functions of the
Sysmac Studio.
NX1P2-□□□□ Learning startup
NX701-□□□□ procedures and
NJ501-□□□□ Sysmac Studio
NJ301-□□□□ operating procedures
NJ101-□□□□ for someone that will
SYSMAC-SE20□□ use NJ/NX series
R88M-1□ motion control
R88D-1SN□-ECT functions for the first
time.
Application
The motion control instructions are
described. When programming, use this
manual together with the NJ-series CPU
Unit Hardware User's Manual (Cat. No.
W500), NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501),and NJ/NX-series CPU Unit
Motion Control User's Manual (Cat. No.
W507).
Information on the built-in EtherCAT
port is provided. This manual provides
an introduction and information on the
configuration, features, and setup. Use
this manual together with the NJ-series
CPU Unit Hardware User's Manual (Cat.
No. W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
Information on the built-in EtherNet/IP
port is provided. Information on the
basic setup, tag data links, and other
features is provided. Use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
Concepts on managing errors that may
be detected in an NJ/NX-series
Controller and information on individual
errors are described. Use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
The operating procedures of the
Sysmac Studio is described.
The operations from hardware
assembly through debugging for axis
parameter settings, simple one-axis
positioning, and two-axis linear
interpolation are described.
Description
9