Ladder Programming; Inserting Circuit Parts; Keyboard Mapping - Omron NX1P Programming Manual

3-4

Ladder Programming

3-4-1

Inserting Circuit Parts

Inserting a Program Input or Output in an AND Structure
Shortcut key:
Toolbox:
Right-click:
Inserting a Program Input in an OR Structure
Shortcut key:
Drag and drop: Drag the connecting line and select a circuit part from the pop-up menu
Inserting a Rung
Shortcut key:
Right-click:
3-4-2

Keyboard Mapping

The following table lists the shortcut keys that you can use when creating ladder programs.
Operation
Entering an N.O. input
Entering an N.C. input
Entering an OR with an N.O. input
Entering an OR with an N.C. input
Entering an output
Entering a NOT output
Calling a function block
Calling a function
Inserting a rung below the cursor
Inserting a rung above the cursor
* Select Keyboard Mapping Reference from the Help Menu to display the Keyboard Mapping Reference.
42
Select a connecting line and press the shortcut key
Example: N.O. Input - C Key, output - O Key
Drag a circuit part from the Toolbox
Right-click a connecting line and select Insert Input or Insert Output from the
Menu.
Select an input and press the W Key. (The N.O. input is inserted in an OR
structure)
Select the start of a rung and press the R Key.
Right-click a rung and select Insert rung above or Insert rung below.
Shortcut keys
C
/
W
X
O
Q
F
I
R
Shift + R
Reference (Shortcut key in CX-Programmer)
Same key * C or L in CX-Programmer
Same key
Same key * Different cursor position
Same key * Different cursor position
Same key
Same key
Same key * F for both FUN and FB
Different key * First letter of instruction
Same key