Hardware Issues - Oracle Sun Fire X4800 Product Notes

Hardware Issues

The following table lists the current hardware issues.
Hardware Issues
"System Posts CPU Fault and Fails to Boot On System With Six Sun InfiniBand Dual Port
4x QDR PCIe Low Profile Host Channel Adapter M2 Cards (22536804)" on page 32
"Reset Takes a Long Time and Causes the Server to Power Cycle" on page 32
"Update SP Firmware After Replacing a CMOD or SP Module (15465497)" on page 33
"MegaCLI CfgEachDskRaid0 Command Does Not Work Correctly (CR
7121867)" on page 33
"DIMM Mismatch on Odd Numbered Pairs Results in DDR Training Failed on Entire
Branch (CR7101624 and CR7111545)" on page 34
"If DIMM Failure Causes Branch Failure, Oracle ILOM Might Not Identify Them as Faulty
(CR7099038 and CR7111543)" on page 35
"When Inserting a CMOD, Simultaneously Rotate Handles Until They Touch the
Chassis" on page 35
"Video Output of CMM Is Distorted or Missing" on page 35
"SATA Drives Not Accessible Through NEM1 (CR 7003993)" on page 36
"Supported Rack Mounting Configuration" on page 36
"DIMM Population Rules" on page 36
"Supported Rack Mounting Configuration" on page 36
"Locking Screws Secure Shelf Rails to Rear Mounting Brackets" on page 39
"Message About Missing Disks After Failed Boot (CR 6939507)" on page 41
"System Does Not Power Up After Power Cycling (CR 6950414)" on page 41
"System Does Not Recognize DIMM Due to SPD Corruption (CR
6946921)" on page 41
Workaround
Yes
N/A
Yes
Yes
Yes
Yes
Yes
Yes
Yes
N/A
N/A
N/A
Yes
Yes
Yes
Yes
Hardware Issues 31