Update Process - Oracle Sun Fire X4800 Product Notes

Workaround 2 Using Oracle ILOM CLI
Properties:
Commands:
5.
Use the load_uri command to upload and install the firmware update package.
The following table shows the required parameters.
Transfer Method
TFTP
FTP
SCP
HTTP
HTTPS
SFTP
Where:
ip_address is the IP address of the system where the file is stored.
■
username is the login user name to the system where the file is stored.
■
password is the login password to the system where the file is stored.
■
rom_nem.pkg is the name of the firmware update package.
■
6. Wait a few moments for Oracle ILOM to confirm the completion of the firmware

update process.

A success or failure status appears.
80 Sun Fire X4800 Server Product Notes • July 2017
type = Network Express Module
ipmi_name = NEM0
fru_manufacturer = VENDOR_Name
fru_part_number = 511-1056-04
fru_extra_1 = FW 5.3.1.0
fault_state = OK
load_uri = (none)
clear_fault_action = (none)
power_state = On
cd
load
reset
set
show
start
stop
Examples
load_uri=tftp://ip_address/rom_nem.pkg
load_uri=ftp://username:password@ip_address/rom_nem.pkg
load_uri=scp://username:password@ip_address/rom_nem.pkg
load_uri=http://username:password@ip_address/rom_nem.pkg
load_uri=https://username:password@ip_address/rom_nem.pkg
load_uri=sftp://username:password@ip_address/rom_nem.pkg