Web Access; Settings; Plugin Installation; View Video-Mode 1 - Complete Camera Management - Wansview Q3 User Manual

3. Web Access

3.1 Settings

To view your camera in any web browser you'll need the camera's IP address and camera's Port.
If your computer is in the same network, just type the address in browser address bar:
http://IP:PORT for example http://113.116.100.223:80. Users can get these data from the app >
advanced settings > about camera.
If your computer is located outside the network where the camera is installed, users need to input
manually the camera's IP in the router in the Port Forwarding Section (please consult your router
user guide or search on line) to view the camera.
The Login mask will appear:

3.1.1 Plugin installation

3.1.2 View Video-Mode 1 - Complete Camera Management

www.wansview.com
The Camera has 2 view mode:
View Mode 1 supported by an OCX
Plugin (HYPlayer.exe)
View Mode 2 supported by an
Adobe Flash Player Plugin
Click on Download Plugin to download
and install the OCX Plugin-HYPlayer
plugin.
Note: If you use Google Chrome or
Firefox you need to install the IE tab:
-Firefox > Add-ons > Extensions. Search
for IE Tab and install.
-Chrome > More Tools > Extensions.
Search for IE Tab and install.
21