The fields that can be configured are described below:
Parameter
FTP Server IP
User Name
Password
TCP Port (1-65535)
Destination File
Source File
Filter
Click Upload to initiate the upload.
Upload Configuration To HTTP
This window is used to upload the configuration file from the Switch to a computer.
The fields that can be configured are described below:
Parameter
Source File
Click Upload to initiate the upload.
Upload Log File
The following window is used to upload the log file from the Switch.
Upload Log To TFTP
This window is used to upload the log file from the Switch to a TFTP Server.
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Description
Enter the FTP Server IP Address used.
Enter the appropriate Username used.
Enter the appropriate Password used.
Enter the TCP Port number used.
Enter the file name that will be stored in the FTP server, e.g. config.cfg.
Enter the location of the Source File, e.g. C:/config.cfg.
Use the drop-down menu to include, begin or exclude a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Figure 12-14 Upload Configuration – HTTP window
Description
Enter the location and name of the Source File.
Figure 12-15 Upload Log – TFTP window
277