Add An Ethernet Acl Profile - D-Link xStack DES-3200 Series Reference Manual

Click the Delete All button to remove all access profiles from this table.
Click the Show Details button to display the information of the specific profile ID entry.
Click the Add/View Rules button to view or add ACL rules within the specified profile ID.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
There are four Add Access Profile windows;
•
one for Ethernet (or MAC address-based) profile configuration,
•
one for IPv6 address-based profile configuration,
•
one for IPv4 address-based profile configuration, and
•
one for packet content profile configuration.

Add an Ethernet ACL Profile

The window shown below is the Add ACL Profile window for Ethernet. To use specific filtering masks in this ACL
profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add ACL Profile button, the following page will appear:
The fields that can be configured are described below:
Parameter
Profile ID (1-4)
Profile Name
Select ACL Type
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 7-3 Add ACL Profile window (Ethernet ACL)
Description
Enter a unique identifier number for this profile set. This value can be set from 1 to 4.
Enter a profile name for the profile created.
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or
packet content. This will change the window according to the requirements for the
137