D-Link xStack DES-3200 Series Reference Manual page 168

Click the Add Rule button to create a new CPU ACL rule in this profile.
Click the <<Back button to return to the previous page.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following page will appear:
The fields that can be configured are described below:
Parameter
Access ID (1-100)
VLAN Name
VLAN ID
Source IP Address
Destination IP
Address
DSCP
Protocol
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 7-32 Add CPU Access Rule (IPv4 ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to
100.
Auto Assign – Select this check box will instruct the Switch to automatically assign an
Access ID for the rule being created.
Enter the VLAN name.
Enter the VLAN ID.
Enter the source IP address.
Enter the destination IP address.
Enter the DSCP value.
Selecting this option instructs the Switch to examine the protocol type value in each
frame's header. Then the user must specify what protocol(s) to include according to
the following guidelines:
Select this option to specify that the rule will be applied to ICMP traffic.
Type – Enter the ICMP packet type value.
Code – Enter the ICMP code value.
160