Reauthenticate Port(S) - D-Link xStack DES-3200 Series Reference Manual

The fields that can be configured are described below:
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.

Reauthenticate Port(s)

This window is used to re-authenticate port(s).
To view this window, click Security > 802.1X > Reauthenticate Port(s) as shown below:
If Port-based is selected in the Authentication Mode drop-down menu in 802.1X Global Settings window, the
following window appears.
If MAC-based is selected in the Authentication Mode drop-down menu in 802.1X Global Settings window, the
following window appears.
The fields that can be configured are described below:
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either Port-based or MAC-based.
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 8-19 Initialize Port(s) - MAC-based window
Description
Select a range of ports to be configured.
Tick the check box and enter the authenticated MAC address of the client
connected to the corresponding port.
Figure 8-20 Reauthenticate Port(s) - Port-based window
Figure 8-21 Reauthentiate Port(s) - MAC-based window
Description
Select a range of ports to be configured.
Tick the check box and enter the authenticated MAC address of the client
connected to the corresponding port.
183