D-Link xStack DES-3200 Series Reference Manual page 206

The fields that can be configured are described below:
Parameter
Port Security
Trap/Log Settings
System Maximum
Address (1-3328)
From Port / To Port
Admin State
Lock Address Mode
Max Learning
Address (0-3328)
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the View Details button to display the information of the specific entry.
After clicking the View Details button, the following page will appear:
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 8-38 Port Security Settings window
Description
Click to enable or disable Port Security Traps and Logs on the Switch.
Enter the system maximum address. Tick the No Limit check box to have unlimited
system addresses.
Use the drop-down menus to select a range of ports to be configured.
Use the drop-down menu to enable or disable Port Security (locked MAC address
table for the selected ports).
This drop-down menu allows the option of how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are:
Permanent – The locked addresses will only age out after the Switch has been reset.
DeleteOnTimeout – The locked addresses will age out after the aging timer expires.
DeleteOnReset – The locked addresses will not age out until the Switch has been
reset or rebooted.
Specify the maximum value of port security entries that can be learned on this port.
198