D-Link xStack DES-3200 Series Reference Manual page 227

The fields that can be configured for SSH Authentication Mode are described below:
Parameter
Password
Public Key
Host-based
Click the Apply button to accept the changes made.
The fields that can be configured for the Encryption Algorithm are described below:
Parameter
3DES-CBC
AES128-CBC
AES192-CBC
AES256-CBC
Cast128-CBC
ARC4
Blow-fish CBC
Twofish128
Twofish192
Twofish256
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 8-61 SSH Authentication Method and Algorithm Settings window
Description
This may be enabled or disabled to choose if the administrator wishes to use a
locally configured password for authentication on the Switch. This parameter is
enabled by default.
This may be enabled or disabled to choose if the administrator wishes to use a
public key configuration set on a SSH server, for authentication. This parameter is
enabled by default.
This may be enabled or disabled to choose if the administrator wishes to use a host
computer for authentication. This parameter is intended for Linux users requiring
SSH authentication techniques and the host computer is running the Linux operating
system with a SSH program previously installed. This parameter is enabled by
default.
Description
Use the check box to enable or disable the Triple Data Encryption Standard
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES128
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES256
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Cast128 encryption algorithm with
Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Arcfour encryption algorithm. The default
is enabled.
Use the check box to enable or disable the Blowfish encryption algorithm with
Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the twofish128 encryption algorithm. The
default is enabled.
Use the check box to enable or disable the twofish192 encryption algorithm. The
default is enabled.
Use the check box to enable or disable the twofish256 encryption algorithm. The
default is enabled.
219