D-Link xStack DES-3200 Series Reference Manual page 202

The fields that can be configured are described below:
Parameter
MAC-based Access
Control State
Method
Password
RADIUS
Authorization
Local Authorization
Log State
Trap State
Max User (1-1000)
VLAN Name
VID (1-4094)
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 8-32 MAC-based Access Control Settings window
Description
Toggle to globally enable or disable the MAC-based access control function on the
Switch.
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based access control. This MAC address list can be configured
in the MAC-based access control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based access control.
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Use the drop-down menu to enable or disable the use of RADIUS Authorization.
Use the drop-down menu to enable or disable the use of Local Authorization.
Use the drop-down menu to enable or disable log state.
Use the drop-down menu to enable or disable trap state.
Enter the maximum amount of users of the Switch. Tick the No Limit check box to
have 1000 users.
Enter the name of the previously configured Guest VLAN being used for this function.
Click the radio button and enter a Guest VLAN ID.
194