D-Link xStack DES-3200 Series Reference Manual page 160

Click the Add Rule button to create a new ACL rule in this profile.
Click the <<Back button to return to the previous page.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following page will appear:
The fields that can be configured are described below:
Parameter
Access ID (1-256)
Offset1-4
Action
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
Figure 7-20 Access Rule List (Packet Content ACL)
Figure 7-21 Add Access Rule (Packet Content ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to
256.
Auto Assign – Select this check box will instruct the Switch to automatically assign
an Access ID for the rule being created.
Enter the data to match for each UDF data field defined in the profile here.
Mask – Enter the offset mask value used here.
Select Permit to specify that the packets that match the access profile are
forwarded by the Switch, according to any additional rule added (see below).
Select Deny to specify that the packets that match the access profile are not
152