Viewing And Editing Classifier Configuration; Figure 60 Classifier: Summary Table; Table 42 Classifier: Summary Table; Table 43 Common Ethernet Types And Protocol Number - ZyXEL Communications ES-2724 User Manual

ES-2724 User's Guide
Table 41 Classifier (continued)
LABEL
Cancel
Clear

18.3 Viewing and Editing Classifier Configuration

To view a summary of the classifier configuration, scroll down to the summary table at the
bottom of the Classifier screen. To change the settings of a rule, click a number in the Index
field.
Note: When two rules conflict with each other, a higher layer rule has priority over
lower layer rule.

Figure 60 Classifier: Summary Table

The following table describes the labels in this screen.

Table 42 Classifier: Summary Table

LABEL
Index
Active
Name
Rule
Delete
Cancel
The following table shows some other common Ethernet types and the corresponding protocol
number.

Table 43 Common Ethernet Types and Protocol Number

ETHERNET TYPE
IP ETHII
X.75 Internet
NBS Internet
ECMA Internet
Chaosnet
138
DESCRIPTION
Click Cancel to reset the fields back to your previous configuration.
Click Clear to set the above fields back to the factory defaults.
DESCRIPTION
This field displays the index number of the rule. Click an index number to edit the rule.
This field displays Yes when the rule is activated and No when it is deactivated.
This field displays the descriptive name for this rule. This is for identification purpose only.
This field displays a summary of the classifier rule's settings.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
PROTOCOL NUMBER
0800
0801
0802
0803
0804
Chapter 18 Classifier