Frame-Type; Weight - ZyXEL Communications ES-2724 User Manual

• Enable ingress checking on the interface.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# ingress-check

42.2.8 frame-type

Syntax:
frame-type <all|tagged>
where
<all|tagged|u
ntagged>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Enable ingress checking on the ports.
• Enable tagged frame-types on the interface.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# ingress-check
sysname(config-interface)# frame-type tagged

42.2.9 weight

Syntax:
weight <wt1> <wt2> ... <wt8>
where
<wt1> <wt2> ...
<wt8>
An example is shown next.
• Enable WFQ queuing on the switch.
• Enable port 2 and ports 6 to 8 for configuration.
Chapter 42 Interface Commands
= Choose to accept both tagged and untagged incoming frames or just
tagged incoming frames on a port.
= Sets the interface WFQ weighting. A weight value of one to eight is
given to each variable from
ES-2724 User's Guide
to .
wt 1 wt 8
293