Multiple Rstp; Spanning Tree Protocol Main Screen; Figure 43 Mrstp Network Example - ZyXEL Communications ES-2724 User Manual

Table 23 STP Port States
PORT STATE DESCRIPTION
Learning
Forwarding

11.1.4 Multiple RSTP

MRSTP (Multiple RSTP) is ZyXEL's proprietary feature that is compatible with RSTP and
STP. With MRSTP, you can have more than one spanning tree on your switch and assign
port(s) to each tree. Each spanning tree operates independently with its own bridge
information.
In the following example, there are two RSTP instances (MRSTP 1 and MRSTP2) on switch
A.
To set up MRSTP, activate MRSTP on the switch and specify which port(s) belong to which
spanning tree.
Note: Each port can belong to one STP tree only.

Figure 43 MRSTP Network Example

11.2 Spanning Tree Protocol Main Screen

The switch allows you to configure a single RSTP configuration or you can configure multiple
configurations. See
Application, Spanning Tree Protocol in the navigation panel to choose whether you want to
configure multiple or a single Spanning Tree Protocol configuration.
Note: This screen is only available if neither RSTP or MRSTP is active. Once you
select RSTP or MRSTP this screen displays the status of your configuration.
Chapter 11 Spanning Tree Protocol
All BPDUs are received and processed. Information frames are submitted to the
learning process but not forwarded.
All BPDUs are received and processed. All information frames are received and
forwarded.
Section 11.1 on page 101 for more information on RSTP. Click Advanced
ES-2724 User's Guide
103