This chapter discusses MAC address port filtering.
10.1 Configure a Filtering Rule
Filtering means sifting traffic going through the switch based on the source and/or destination
MAC addresses and VLAN group (ID).
Click Advanced Application and Filtering in the navigation panel to display the screen as
shown next.
Figure 42 Filtering
The following table describes the related labels in this screen.
Table 21 FIltering
LABEL
Active
Name
Chapter 10 Filtering
DESCRIPTION
Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification only.
C
H A P T E R
ES-2724 User's Guide
1 0
Filtering
99