ZyXEL Communications ES-2724 User Manual page 322

ES-2724 User's Guide
Table 100 Firmware Features
FEATURE
Multicast VLAN Registration
(MVR)
IP Multicast
RIP
RSTP (Rapid Spanning Tree
Protocol) / MRSTP (Multiple
RSTP)
Link Aggregation
Port Authentication and
Security
Device Management
Firmware Upgrade
Configuration Backup &
Restoration
Cluster Management
320
DESCRIPTION
Multicast VLAN Registration (MVR) is designed for applications (such as
Media-on-Demand (MoD)) using multicast traffic across a network. MVR
allows one single multicast VLAN to be shared among different
subscriber VLANs on the network.
This improves bandwidth utilization by reducing multicast traffic in the
subscriber VLANs and simplifies multicast group management.
With IP multicast, the switch delivers IP packets to a group of hosts on
the network - not everybody. In addition, the switch can send packets to
Ethernet devices that are not VLAN-aware by untagging (removing the
VLAN tags) IP multicast packets.
RIP (Routing Information Protocol) allows a routing device to exchange
routing information with other routers.
RSTP detects and breaks network loops and provides backup links
between switches, bridges or routers. It allows a switch to interact with
other RSTP -compliant switches in your network to ensure that only one
path exists between any two stations on the network. MRSTP allows you
to configure multiple RSTP configurations and assign ports to each tree.
Link aggregation (trunking) is the grouping of physical ports into one
logical higher-capacity link. You may want to trunk ports if for example, it
is cheaper to use multiple lower-speed links than to under-utilize a
high-speed, but more costly, single-port link.
For security, the switch allows authentication using IEEE 802.1x with an
external RADIUS server and port security that allows only packets with
dynamically learned MAC addresses and/or configured static MAC
addresses to pass through a port on the switch. For redundancy, multiple
RADIUS servers can be configured.
Use the web configurator to easily configure the rich range of features on
the switch.
Download new firmware (when available) from the ZyXEL web site and
use the web configurator, CLI or an FTP/TFTP tool to put it on the switch.
Note: Only upload firmware for your specific model!
Make a copy of the switch's configuration and put it back on the switch
later if you decide you want to revert back to an earlier configuration.
Cluster management (also known as iStacking) allows you to manage
switches through one switch, called the cluster manager. The switches
must be directly connected and be in the same VLAN group so as to be
able to communicate with one another.
Appendix A Product Specifications