Getting Help - ZyXEL Communications ES-2724 User Manual

Table 89 Command Interpreter Mode Summary (continued)
.
MODE DESCRIPTION
Config Commands available in this mode
allow you to configure settings that
affect the switch globally.
Command modes that follow are sub-modes of the config mode and can only be accessed from within the config
mode.
Config-vlan This is a sub-mode of the config mode
and allows you to configure VLAN
settings.
Config-interface This is a sub-mode of the config mode
and allows you to configure port
related settings.
Config-mvr This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
Enter
exit

39.8 Getting Help

The system includes a help facility to provide you with the following information about the
commands:
• List of available commands under a command group.
• Detailed descriptions of the commands.
Chapter 39 Introducing Commands
to quit from the current mode or enter
HOW TO LOGIN/
PROMPT
ACCESS
config
Type in
sysname(config)#
enable mode.
vlan
Type followed by
sysname(config-vlan)#
a number (between 1 to
4094). For example,
vlan 10 to configure
settings for VLAN 10.
Type interface
sysname(config-
port-channel
interface)#
followed by a port
number. For example,
i nterface port-
channel 8 to
configure port 8 on the
switch.
MVR
To enter mode,
sysname(config-mvr)#
mvr
enter followed by
a VLAN ID (between 1
and 4094). For
example, enter mvr 2
to configure multicast
settings on VLAN 2.
to exit the command interpreter.
logout
ES-2724 User's Guide
237