Port Setup; Figure 29 Port Setup; Table 12 Port Setup - ZyXEL Communications ES-2724 User Manual

ES-2724 User's Guide
Table 11 IP Setup (continued)
LABEL
Delete
Cancel

7.7 Port Setup

Use this screen to configure switch port settings.Click Basic Setting and then Port Setup in
the navigation panel to display the configuration screen.

Figure 29 Port Setup

The following table describes the labels in this screen.

Table 12 Port Setup

LABEL
Port
*
Active
78
DESCRIPTION
Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out from the switch.
Click Cancel to clear the Delete check boxes.
DESCRIPTION
This is the port index number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select this check box to enable a port. The factory default for all ports is enabled. A
port must be enabled for data transmission to occur.
Chapter 7 Basic Setting