Fujitsu iPAD100 series Operation Manual page 6

Table of Contents

Advertisement

Draft
FCC RF Exposure Guidelines
The radio module in this device has been evaluated under FCC Bulletin OET 65C and found
compliant to the requirements as set forth in CFR Sections 2.1091, 2.1093, and 15.247(b)(4)
addressing RF Exposure from radio frequency devices. The iPad contains an internal low-power
radio whose radiated output power is far below the FCC radio frequency exposure limits.
Nevertheless, the iPad shall be used in such a manner that the potential for human contact with
the radio antenna during normal operation is minimized. The iPad should be utilized/worn in
accordance with the instructions for the device.
This device must not be collocated with any other antenna or transmitters.
Option - Laser Devices
This product contains a Class 2 laser and complies with US 21CFR1040.10. These type of lasers
use a low power visible light diode. Care should be taken to avoid staring directly into the light.
Laser power up to 1.2 mW at 650nm could be accessible in the interior.
"CAUTION – use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure."
Scanner Safety Labeling
Safety
This product has been certified with Underwriters Laboratories for use in the United
States and Canada.
5

Advertisement

Table of Contents
loading

Table of Contents