Fujitsu iPAD100 series Operation Manual page 16

Draft
(1) Connect the AC adapter to either of the cradle connection ports.
(2) Plug the AC adapter into a wall outlet.
(3) Turn off the iPAD.
(4) Insert the iPAD with the main battery installed into the cradle until you hear a click.
Charging starts.
During charging, the LED is on and is orange. When charging is completed, the LED
changes to green.
The charging time is about 2.5 hours.
Note
Gently mount the iPAD on the cradle
to prevent malfunctioning of the iPAD
and cradle.
If the LED does not light, make sure
that the IPAD is correctly mounted on
the cradle.
If you mount the iPAD on the cradle
while iPAD power is on, the LED
lights but the battery is not fully
charged.
⌦ This completes the operation.
<Using two cradles (IPAD142-01)>
Using two cradles, you can simultaneously charge two batteries, one in each of two iPAD
units.
Two cradles (IPAD142-01), one AC adapter (CA05306-D500), and one daisychain cable
(CA72001-1895) are required for this operation.
CAUTION
15