Chapter 9 User Action Response To Messages - Fujitsu iPAD100 series Operation Manual

9 User Action in Response to Messages
If any of the following messages are displayed, take the action described in the following table.
Message Cause
Main battery alarm The main
battery
The front light is off. charge is
too low.
Auxiliary battery The
alarm auxiliary
battery
charge is
too low.
Is this the initial No
installation? application
programs
have been
installed.
A power failure may The
have occurred. memory
data was
deleted
because, for
example,
the battery
charge was
too low.
An error was An error
detected on the flash occurred in
disk. the system
information
storage area
of the flash
ROM.
User response
Either replace the main battery or
charge the main battery using the
battery charger or cradle.
>>Reference>>
Section 1.2.2, "Charging the
main battery"
Section 1.2.3, "Installing and
removing the main battery"
Charge the auxiliary battery.
>>Reference>>
Section 1.2.4, "Charging the
auxiliary battery"
Press the [SFT] and [CAN] keys
simultaneously to install application
programs.
>>Reference>>
"IPAD Systems Users Guide"
Press the [SFT] and [CAN] keys
simultaneously to automatically
recover the application programs.
>>Reference>>
"iPAD Systems Users Guide"
Tap the [OK] button to initialize the
flash ROM and then reinstall the
application programs.
>>Reference>>
"iPAD Systems Users Guide"
44