Virtual Keyboard; Displaying The Keyboard; Inputting A Character; Changing The Keyboard Type - Fujitsu iPAD100 series Operation Manual

Table of Contents

Advertisement

again.
Use a stylus.
Do not tap the screen with a pencil, ballpoint
pen, or any other pointed object. Doing so
may scratch or crack the screen.
Do not touch the screen with your palm while
you are tapping the screen.
⌦ This completes the operation.
3.6

Virtual Keyboard

The screen keyboard is the keyboard that is displayed on the screen.
3.6.1

Displaying the keyboard

Open and close the screen keyboard as follows:
(1) To open the screen keyboard, press the [0] key while holding down the [SFT] key.
The screen keyboard appears on the lower part of the screen.
(2) To close the screen keyboard, press the [0] key while holding down the [SFT] key, as you did to
open it.
The screen keyboard disappears from the lower part of the screen.
⌦ This completes the operation.
3.6.2

Inputting a character

To input a character, tap the input field to make it ready for input (the cursor is displayed). When the
field is ready for input, tap a character on the screen keyboard. The character is entered in the input
field.
⌦ This completes the operation.
3.6.3

Changing the keyboard type

There are three types of screen keyboard: keyboard (Figure 1), extended keyboard (Figure 2), and
31

Advertisement

Table of Contents
loading

Table of Contents