Fujitsu iPAD100 series Operation Manual page 19

Draft
Charging the main battery using a single-pack charger (CA05951-7080)
You can charge the main battery using a single-pack charger (CA05951-7080).
Charging using this method requires a single-pack charger (CA05951-7080) and an AC
adapter
(CAS05306-D500).
(1) Connect the AC adapter to the single-pack charger.
(2) Plug the AC cable of the AC adapter into a wall outlet.
(3) Mount the main battery on the single-pack charger.
Charging starts.
During charging, the pack charger LED is on and is orange. When charging is completed,
the LED changes to green. The charging time is about 2.5 hours.
Note
If the pack charger LED lights in red, the
battery is faulty and cannot be charged.
Replace the battery.
The LED will not light if the main
battery is not correctly installed.
⌦ This completes the operation.
CAUTION
18