A Specifications - Fujitsu iPAD100 series Operation Manual

Table of Contents

Advertisement

A
Specifications
Item
Controller
CPU
Memory
OS
Display section
Type
Screen size
Display lighting
Operator section
Strage card
External interfaces
Power supply
Main-Battery
Operating time
Main-Battery
charging time
Sub-Battery
charging time
Item
Environmental
Temperature
conditions
Relative
humidity
Scanner
Audio
Magnetic card reader
Intel XScale-400MHz
ROM: 32M bytes RAM: 64M bytes(SDRAM)
FFS 32MB
Windows CE .NET
3.5-inch TFT reflective color LCD
240 (H) × 320 (V) dots
High-intensity front light
Touch panel (resistive-film type), trigger switches (bar code
scanner input), power key, function keys,
set key, cursor keys, clear key, numeric keypad, × key, / key,
decimal-point (.) key, cancel key, enter key, shift key, and
cellular phone input mode (alphabetic/hiragana input)
Compact flash × 1 slot (RF-LAN card)
Cradle I/F: USB client
(for PC connection)
Charge terminals
Lithium ion battery pack, 3.7 V 1700 mAh
About 3 hours
(new battery, room temperature, wireless communication in
progress for 10% of the time, scanner reading once every ten
seconds, and front light on at the "dark" setting)
About 7 hours
(new battery, room temperature, wireless communication in
progress for 10% of the time, and front light off)
About 2.5 hours (unit power off, operating from the cradle)
About 2.5 hours (With the battery pack charger)
About 24 hours (from the Main-Battery)
Operating: 0 to 40°C (non-condensing)
Idle: -20 to 60°C (non-condensing)
Operating: 20 to 85% (non-condensing)
Idle: 20 to 85% (non-condensing)
JAN/EAN-13/8,UPC-A/E,NW-7,CODE39/128,Interleaved2of5
(ITF)
Speaker×1 built-in,
Microphone×1 built-in
Headset connector(input/output)
JIS Ⅰ(ISO1/2), JISⅡ
48
Specification
Specification

Advertisement

Table of Contents
loading

Table of Contents