Resetting The Ipad; Using The Reset Switch; Completely Resetting The Ipad - Fujitsu iPAD100 series Operation Manual

⌦ This completes the operation.
3.7

Resetting the iPAD

3.7.1

Using the reset switch

Use the reset switch mainly to install an application or driver or change a setting.
(1) If possible, save the data that you are working on.
(2) Using a stylus, press the reset switch located on the left side of the rear of the iPAD.
(3) The screen turns black, then the power is turned on again.
If you reset the iPAD, any unsaved data or
settings are lost.
Do not use the reset switch while the iPAD is in
operation (saving data or resuming operation).
Doing so may cause data in memory to be lost.
⌦ This completes the operation.
3.7.2

Completely resetting the iPAD

Completely reset the iPAD if it is not operating correctly after a reset or if you want to prevent
deterioration of the main battery when storing the iPAD for a long period.
(1) Turn off the iPAD
CAUTION
33