Table of Contents
Advertisement
5.1
Installing the RF Card
5.1.1 Parts for RF LAN card installation
The following parts are included with main unit:
(A) Side cover
(B) Card stopper
Stopper for Intel / Symbol RF LAN Card
(C) Card Tab
Pull-tab for RF Card
5.2. Installation procedure for Intel or Symbol RF card
Remove battery cover and remove battery pack
Remove the protective sheet from the adhesive tape
on the slit side of the pull-tab. Attach the pull-tab to
the RF LAN card to match forked portion of the
pull-tab with RF card edge as shown here at right.
Insert RF LAN card about 2/3 of the way in. Remove the protective sheet
from the RF antenna cable and connect the RF cable and card as shown here.
Connect antenna cable A with inside connecter on RF card.
Antenna cable A has a black mark on the RF connector; make sure the black
mark is showing when the cable is connected.
(A)
(C)
Antenna cable A
Antenna cable B
Antenna cable B
Antenna cable A
36
(B)
Forked portion
RF LAN card
Slit
Pull tab
Advertisement
Table of Contents
