Fujitsu iPAD100 series Operation Manual page 20

Draft
<Using a single-pack charger (CA05951-7080) and a cradle (IPAD142-01) that are
connected>
You can simultaneously charge main batteries mounted on a single-pack charger and in the
IPAD mounted on a cradle.
A single-pack charger (CA05951-7080), cradle (IPAD142-01), AC adapter (FHTAC601A), and
a daisychain cable (CA72001-1895) are required for this operation.
(1) Using the daisychain cable, connect the AC adapter connection interface of the single-
pack charger to either the left or right AC adapter connection interface on the cradle.
The cable can be connected to either of the two AC adapter connection interfaces
provided on the cradle.
(2) Connect the AC adapter to the unused AC adapter connection interface on the cradle.
(3) Plug the AC cable of the AC adapter into a wall outlet.
(4) Turn off the iPAD.
(5) Insert the iPAD with the main battery installed into the cradle until you hear a click.
Charging starts.
During charging, the LED is on and is orange. When charging is completed, the LED changes
to green.
The charging time for the two is about 2.5 hours.
Note
Gently mount the iPAD on the cradle to
prevent malfunctioning of the iPAD and
cradle.
If the LED does not light, make sure
that the iPAD is correctly mounted on
the cradle.
19