Chapter 6 Bar Code Scanner; Using The Bar Code Scanner - Fujitsu iPAD100 series Operation Manual

6 Bar Code Scanner
Reading aperture of bar code scanner
6.1

Using the Bar Code Scanner

(1) Aim the bar code scanner of the iPAD at a bar code.
(2) Press either of the trigger switches on the two sides of the iPAD. A scanning beam passes
through the reading aperture of the bar code scanner.
(3) Run the scanning beam across the bar code.
(4) The LED lights in green if the data has been read correctly.
(5) The scanning beam automatically stops when reading is completed.
(6) Release the trigger switch.
38