Fujitsu iPAD100 series Operation Manual page 45

<Cleaning the IC card reader/writer>
The contacts of the IC card reader/writer become contaminated with dirt and dust from use. Clean the reader
using the cleaning card supplied as an accessory.
−
Cleaning cycle: Clean the reader every month
or whenever errors are
frequent.
−
Cleaning method: Insert the cleaning card in the reader with the rough side (cleaning side) facing up.
(Insertion is the same as for an IC card.)
−
Replacement cycle: Replace the cleaning card (supplied at a cost) when it becomes contaminated.
If errors still occur after the reader has been cleaned, notify your Fujitsu maintenance representative.
CAUTION
Before cleaning the reader, turn off the iPAD
to guard against a possible malfunction.
Figure 2
43