D.3 Number Entry - Emerson Rosemount 3051P Reference Manual

Local Operator Interface
May 2017
D.3 Number entry
Floating-point numbers can be entered with the LOI. All eight number locations on the top line can be
used for number entry. Refer to
number entry example for changing a value of "-0000022" to "000011.2"
Step
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Usage notes:
It is possible to move backwards in the number by scrolling to the left arrow symbol and pressing

enter.
The negative symbol is only allowed in the left most position.

Numbers can be entered in scientific notation by placing an "E" in the 7th position.

95
Table 2-2 on page 11
Instruction
When the number entry begins, the left most position is the selected
position. In this example, the negative symbol, "-", will be flashing on the
screen.
Press the scroll button until the "0" is blinking on the screen in the
selected position.
Press the enter button to select the "0" as an entry. The second digit from
the left will be blinking.
Press the enter button to select "0" for second digit. The third digit from
the left will be blinking.
Press the enter button to select "0" for the third digit. The fourth digit
from the left will now be blinking.
Press the enter button to select "0" for the fourth digit. The fifth digit
from the left will now be blinking.
Press scroll to navigate through the numbers until the "1" is on the screen.
Press the enter button to select the "1" for the fifth digit. The sixth digit
from the left will now be blinking.
Press scroll to navigate through the numbers until the "1", is on the
screen.
Press the enter button to select the "1" for the sixth digit. The seventh
digit from the left will now be blinking.
Press scroll to navigate through the numbers until the decimal, ".", is on
the screen.
Press the enter button to select the decimal, ".", for the seventh digit.
After pressing enter, all digits to the right of the decimal will now be zero.
The eighth digit from the left will now be blinking.
Press the scroll button to navigate through the numbers until the "2", is on
the screen.
Press the enter button to select the "2" for the eighth digit. The number
entry will be complete and a "SAVE" screen will be shown.
00809-0700-4001, Rev AA
for LOI button operation. Below is a floating-point
(indicated by underline)
Reference Manual
Current position
-0000022
00000022
00000022
00000022
00000022
00000022
00001022
00001022
00001122
00001122
000011.2
000011.0
000011.2
000011.2
Local Operator Interface