Number Entry - Emerson Rosemount 2088 Reference Manual

Reference Manual
00809-0100-4108
C.3

Number entry

Floating-point numbers can be entered with the LOI. All eight number locations on the top
line can be used for number entry. Refer to
operation. Below is a floating-point number entry example for changing a value of
"-0000022" to "000011.2".
Step
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Usage notes:
• It is possible to move backwards in the number by scrolling to the left arrow symbol
and pressing enter.
Reference Manual
Instruction
When the number entry begins, the left most position is
the selected position. In this example, the negative
symbol, "-", will be flashing on the screen.
Press the scroll button until the "0" is blinking on the
screen in the selected position.
Press the enter button to select the "0" as an entry. The
second digit from the left will be blinking.
Press the enter button to select "0" for second digit. The
third digit from the left will be blinking.
Press the enter button to select "0" for the third digit.
The fourth digit from the left will now be blinking.
Press the enter button to select "0" for the fourth digit.
The fifth digit from the left will now be blinking.
Press scroll to navigate through the numbers until the
"1" is on the screen.
Press the enter button to select the "1" for the fifth digit.
The sixth digit from the left will now be blinking.
Press scroll to navigate through the numbers until the
"1", is on the screen.
Press the enter button to select the "1" for the sixth digit.
The seventh digit from the left will now be blinking.
Press scroll to navigate through the numbers until the
decimal, ".", is on the screen.
Press the enter button to select the decimal, ".", for the
seventh digit. After pressing enter, all digits to the right
of the decimal will now be zero. The eighth digit from the
left will now be blinking.
Press the scroll button to navigate through the numbers
until the "2", is on the screen.
Press the enter button to select the "2" for the eighth
digit. The number entry will be complete and a "SAVE"
screen will be shown.
Local Operator Interface (LOI) Menu
Configuring with a LOI for LOI button
Current position (indicated by
underline)
-0000022
00000022
00000022
00000022
00000022
00000022
00001022
00001022
00001122
00001122
000011.2
000011.0
000011.2
000011.2
April 2021
97