2.3.3
Arm Mounting
PPC-3100S/3120S/3150S can be mounted on a VESA-compliant arm mount with a
75 mm interface pad. To affix the panel PC to an arm mount, follow the steps below.
1.
Refer to the installation instruction of the mounting arm to correctly mount the
arm onto the surface as a base.
2.
Align the retention screw holes on the mounting arm interface with VESA holes
in the panel PC, and secure the panel PC by four M4 retention screws. (see Fig-
ure 2.33)
Warning! Ensure that the thread depth of the screws on the rear panel does not
exceed 4 mm.
PPC-3100S/3120S/3150S User Manual
Figure 2.33 Arm mount for panel PC
26