Figure 48: Vertical Mounting; Figure 49: Horizontal Mounting - AT&T Digital Life Installation And Operation Manual

1. Insert the two screws provided and secure the mounting plate to the wall or
ceiling surface. (If mounting in plasterboard or drywall, drill a 3/16 in. hole and
use the plastic anchors provided.)
2. After the mounting plate is secured, slide the alarm over the mounting plate.
3. Complete labels and attach: Two labels have been provided that have important
information on what to do in case of an alarm. Add the phone number of your
emergency service provider in the space provided. Place one label next to the
alarm after it is mounted, and one label near a fresh air source such as a door or
window.
AT&T Proprietary (Internal Use Only)
Installation and Operations Manual

Figure 48: Vertical Mounting

Figure 49: Horizontal Mounting

—77—