Figure 69: Takeover Module - Dc Power Input - AT&T Digital Life Installation And Operation Manual

Module does monitor the batteries and power supply and will signal the DLS when the
Takeover Module is operating on battery backup and/or the batteries are low.
The green LED on the Takeover Module illuminates solid when the batteries are fully or
partially charged, flashes when the batteries are low, and is off when not powered.
Follow these instructions to connect the Takeover Module to a power source:
Step Action
1. Connect the power wire pair from the AC to DC converter to the power
connectors in the Takeover Module with the positive (+) wire on the left side
and the negative (–) wire on the right side. (See Figure 69.).

Figure 69: Takeover Module - DC Power Input

Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—106—