Digital Life System Alarm Reporting; Event Notification Service (Not Evaluated By Ul) - AT&T Digital Life Installation And Operation Manual

2.6

Digital Life System Alarm Reporting

Within the Digital Life Premises Platform the Digital Life Controller is equipped with an
Alarm Manager application which receives alarm messages from intrusion devices, fire
devices, the 915MHz two-way keypad and the 433MHz one-way four button key fob.
The Alarm Manager application sends alarm messages over the AT&T Cellular Data
Network to a DMP IP Alarm Receiver located in an AT&T Digital Life Data Center. The
alarms are then automatically passed to the AT&T Digital Life Central Monitoring Center
for handling.
The following are the primary alarm messages that can be communicated from the
Alarm Manager application executing on the Digital Life Controller in a customer's home
to the AT&T Digital Life Monitoring Center via the DMP IP Alarm Receiver:
Fire - with device identification
Intrusion - with device identification
Fire Emergency - from fixed function button on keypad
Aux Emergency - from fixed function button on keypad
Police Emergency - from fixed function button on keypad
Duress – based on keypad entry
Low battery - with device identification
Tamper – alarms from the Digital Life Controller Cabinet and other devices
2.7

Event Notification Service (Not Evaluated by UL)

Optionally within their Digital Life Service, customers will be able to be automatically
notified when specified events occur in their home. There are a wide range of possible
events that could trigger a notification, including:
Fire alarm
Intrusion alarm
Motion detected
Window opened
Door opened
Customers will have the option of being notified via text messaging or email.
Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—12—