AT&T Digital Life Installation And Operation Manual page 55

Action
STEP 4. Observe LEDs.
Action
Observe the three LEDs on the HPAV to Ethernet Bridge and the green Power LED and
green PLC Link LED should illuminate confirming the there is a HPAV network
connection over the in-home electrical wiring system between the HPAV to Ethernet
Bridge and the DLC AC-to-AC Adapter with Integrated HPAV.
Installation and Operations Manual
Illustration(s)
The pushbuttons are located on the side of the panel.
The functionality for each pushbutton is described
below:
Security Pushbutton – Used for security
pairing between devices
Factory Default Pushbutton – Used for
resetting device to factory default settings
AT&T Proprietary (Internal Use Only)
—37—