Arming The System─Bypass; Figure 88: Keypad - Number Of Open State Devices; Figure 89: Keypad - Bypass; Figure 90: Keypad - Example: Bedroom Window Open - AT&T Digital Life Installation And Operation Manual

Installation and Operations Manual
7.1.5 Arming the System─BYPASS
When arming the system for STAY or AWAY, you may get a message indicating that the
system cannot arm because a sensor(s) is in an opened state, such as a window and/or
door, as shown in Figure 88 . You may close the open sensor(s) before arming or utilize
the BYPASS feature.
Figure 88: Keypad – Number of Open State Devices
The LCD will display "Press BYPASS to Proceed", as shown in Figure 89.

Figure 89: Keypad - BYPASS

The identity of the open sensor(s) will appear in the LCD display, as shown in Figure 90.
Figure 90: Keypad – Example: Bedroom Window Open
AT&T Proprietary (Internal Use Only)
—132—