Figure 70: Takeover Module - 24-Hour Battery Backup - AT&T Digital Life Installation And Operation Manual

Step Action
2. Install the 2x CR123A batteries. (See Figure 70.)

Figure 70: Takeover Module - 24-Hour Battery Backup

Step Action
3. Connect the two power wires to the AC to DC power adapter.
NOTE: Pay close attention to the polarity, (+) and (-), indicated on the AC to
DC power adapter.
4. Plug the AC to DC power adapter into an AC power outlet. (See Figure 71).
5. Install the retaining screw into the plastic tab located at the top of the unit to
secure the unit to the AC power outlet.
NOTE: For U.S installations only: Use the supplied power cube mounting
bracket. Not for use in Canada.
Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—107—