AT&T Digital Life Installation And Operation Manual page 166

System Messages
"<Device Name> - Offline"
"<Device Name> - Low Battery"
"<CO Device Name> - CO
Detected"
"<Smoke Device Name> - Smoke
Detected"
"<PIR Device Name> - Motion
Detected"
"Press * to confirm FIRE"
"Fire Emergency Sent"
"Press * to confirm AUX"
"Aux Emergency Sent"
"Press * to confirm POLICE"
"Police Emergency Sent"
"Press BYPASS to Proceed"
"Arming – Exit Now"
Installation and Operations Manual
The DLC Cabinet has lost communication with a
device
A device battery level is low and the battery needs
to be replaced
A CO detector has been triggered
A smoke detector has been triggered
A motion detector has been triggered
Confirm pressing FIRE button on keypad
Confirmation that Fire Emergency has been sent to
Digital Life Central Monitoring Center
Confirm pressing AUX button on keypad
Confirmation that Aux Emergency sent to Digital
Life Central Monitoring Center
Confirm pressing POLICE button on keypad
Confirmation that Police Emergency sent to Digital
Life Central Monitoring Center
STAY or AWAY button has been pressed, but
system is "Not Ready to Arm" and BYPASS button
must be pressed to proceed
System is arming in the Armed-STAY or Armed-
AWAY mode and system is in the Exit-Delay mode
AT&T Proprietary (Internal Use Only)
—148—
Meaning