Figure 17: Dld-Devices Screen; Figure 18: Dld-Specific Device Screen - AT&T Digital Life Installation And Operation Manual

Installation and Operations Manual
When the DLC is in the Discovery mode, the DLT can then proceed with installing and
discovering devices. As devices are discovered and registered, they will appear on the
screen. The DLT can take the DLC out of the Discovery mode by selecting Stop
Discovery.
If the DLT wants to label or change the label on a specific device, the DLT can select the
Devices tab, which will return to the Devices screen as depicted in Figure 17.
Figure 17: DLD—Devices Screen
The DLT can select the specific device that he wants to re-label as depicted in Figure 18
by selecting the "Edit" button.
Figure 18: DLD—Specific Device Screen
AT&T Proprietary (Internal Use Only)
—21—