Section 3: Test Script Processor Interaction
Figure 3-2
Importing a factory script project from the Series 2600
Step 2: Modifying the test code for the SourceVMeasureI function
As shown in
"main.tsp" script file. The test code for all of the functions of the KIGeneral factory script are in this
tab. Use the scroll buttons on the right side of the tab to view more code.
Editing example
The following line of code in the "main.tsp" script file applies to the SourceVMeasureI function:
92bias = display.prompt("+00.000", " Seconds", "Enter BIAS Voltage.", 0, -
3-6
Figure
3-3, the test code for the script functions is contained in the tab for the
40, 40)
Return to
Section Topics
Series 2600 System SourceMeter
2600S-900-01 Rev. C / January 2008
®
Instruments User's Manual